TRS-RenTelco - QED SP-3-4-PK 0.75-Inch Stainless Steel Bladder Pump, Consultant's Kit

Environmental >> Water Sampling

View larger image

QED - SP-3-4-PK 0.75-Inch Stainless Steel Bladder Pump, Consultant's Kit

Opts:

Available For: Rent, Lease, Purchase

Rental Price

Please sign in for pricing.

New customer? Start here

*Qty

Not what you're looking for? View Category Listing and Manufacturer Listing

Available for purchase

Please sign in for pricing

We’re here to help! Call 800-874-7123 or

DESCRIPTION

SPECIFICATIONS

DOWNLOADS

The Sample Pro Portable MicroPurge Pump is the first pump developed specifically for low-flow sampling at sites where groundwater samples are collected from many monitoring wells with the same pump. This 0.75-inch-diameter Sample Pro Pump is easy to disassemble without any tools and simple to clean to eliminate any potential cross contamination. Additionally, the Sample Pro disposable bladder, which snaps in and out without any clamps, can be discarded after each well is sampled. The stainless steel Sample Pro pump is capable of pumping a maximum lift up to 200 feet (67 meters). The Sample Pro pump is rugged, reliable, and designed for easy use in the field. The stainless steel construction of the Sample Pro is truly durable, with no motors, bearings, or impellers to go bad. Even if the pump fills with silt, it can be put into action again with a quick, simple cleaning. Output pressure is strong and controllable. This sampling pump also minimizes turbidity and silting caused by the well surging of other devices such as bailers and jerk samplers and is capable of collecting quality samples at significant savings.

Specifications

Outside Diameter: 0.75 inches (19 mm)
Length: 10.75 inches (273 mm) with Push-In Fittings
Weight: 0.5 lbs. (0.23 Kg)
Maximum Lift: 200 feet (67 m)
Volume per Stroke: 0.33 to 0.50 ounces (10 to 15 mL)
Materials of Construction: Body & Cover are 316 Stainless Steel; Inlet, Discharge & Head are 303 Stainless Steel; Bladder is Polyethylene; and, O-Rings are Viton.
Fitting Type: Push-In Fitting with 316 Stainless Steel Grab Plate
Air Fitting: 1/8-inch (3.2 mm) Outside Diameter
Fluid Discharge: 1/4-inch (6.4 mm) Outside Diameter